BWBTB - C-40 HIGH TEMP CHAIN LUBRICANT

  • MSDS: BWBTB
  • Manufacturer: DOW CORNING CORP
  • Product Name: C-40 HIGH TEMP CHAIN LUBRICANT
  • National Stock Number: 9150-00N055774
Product Identification

Product ID:C-40 HIGH TEMP CHAIN LUBRICANT
MSDS Date:06/06/1990
FSC:9150
NIIN:00N055774
MSDS Number: BWBTB

Responsible Party
DOW CORNING CORP
S SAGINAW RD
MIDLAND, MI 48686
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-6000

Preparer: JACK L. SHENEBERGER

Cage: 5D028

Contractor
DOW CORNING CORP
AUBURN, MI 48611 US

Telephone: 517-496-4388

Cage: 71984

Ingredients

POLY(OXY(METHYL-1,2-ETHANEDIYL)),

CAS: 9003-13-8

RTECS: TR4680000

Fraction By Weight: >99%

OSHA PEL N/K

ACGIH TLV: N/K


GRAPHITE; (GRAPHITE, NATURAL)

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: <1%

OSHA PEL 15 MPPCF RDUST

ACGIH TLV: 2 MG/M3 RDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: DIRECT CONTACT IRRITATES
SLIGHTLY W/REDNESS & SWELL. SKIN: SINGLE RELATIVELY SHORT EXPOS
CAUSES NO KNOWN ADVERSE EFT. SEVERAL RPTD PRLNG EXPOS (24 TO 48
HRS) MAY IRRITATE. INHAL: NO IRRITATION T O EYES & RESPIRATORY
PASSAGES. NO INJURY IS LIKELY FROM RELATIVELY SHORT EXPOS OF LESS
THAN 8 HRS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INGEST: SM AMTS TRANSFERRED TO MOUTH
BY FINGERS DURING USE, ETC., SHOULD NOT INJURE. SWALLOWING LG AMTS
MAY CAUSE DIGESTIVE DISCOMFORT. THIS PROD, AS W/ANY CHEM, MAY
ENHANCE ALLERGIC CNDTNS ON CERTAIN PEOPLE. CHRONIC: NO KNOWN
ADVERSE CHRONIC HLTH EFTS, BUT UNNEC EXPOS TO ANY CHEM SHOULD BE
AVOIDED.
Medical Cond Aggravated by Exposure:MANUFACTURER DOES NOT KNOW OF ANY
MEDICAL CONDITION THAT MIGHT BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.

First Aid

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . EYES:
IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WIPE OF
F AND FLUSH WITH WATER.

Fire Fighting

Flash Point Method:CC
Flash Point:310F,154C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN TO MANUFACTURER.

Accidental Release

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT & CONTAIN
FOR SALVAGE OR DISPOSAL. PRODUCT IS AN OIL IN CONTEXT OF U.S. CLEAN
WATER ACT. SPILLS TO SURFACE WATERS OR TO WATERCOURSE/SEWER LEADING
TO SURFACE WATERS, T HAT CAUSE VISIBLE SHEEN MUST BE REPORTED TO
NRC.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE REASONABLE CARE AND CAUTION.
Other Precautions:PRECAUTIONS ARE FOR ROOM TEMPERATURE HANDLING; USE AT
ELEVATED TEMPERATURES OR AEROSOL/SPRAY APPLICATIONS MAY REQUIRE
ADDED PRECAUTIONS.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: NONE SHOULD BE NEEDED. MECAHNICAL (GENERAL):
RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASHING AT MEALTIME & AT END OF SHIFT IS
ADEQUATE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>392F,>200C
Melt/Freeze Pt:M.P/F.P Text:<1F,<-17C
Vapor Pres:<5
Vapor Density:>1 @ 77F
Spec Gravity:1 @ 77F
Solubility in Water:<0.1
Appearance and Odor:BLACK LIQUID; VERY LITTLE ODOR.
Percent Volatiles by Volume:0 (WT)

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CARBON DIOXIDE AND TRACES OF
INCOMPLETELY BURNED CARBON PRODUCTS.

Disposal

Waste Disposal Methods:ALL LOCAL, STATE AND FEDERAL REGULATIONS
CONCERNING HEALTH & POLLUTION SHOULD BE REVIEWED TO DETERMINE
APPROVED DISPOSAL PROCEDURES. CONTACT MANUFACTURER IF THERE ARE ANY
DISPOSAL QUESTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.